product-new-image-anti-skid-rubber-grip-lock-handlebars-for-mtb-bmx-road-cruisers-bicycle-accessories-bike, product-new-image-anti-skid-rubber-grip-lock-handlebars-for-mtb-bmx-road-cruisers-bicycle-accessories-bike, /Handle-grips
EN
Textured Rubber Grip Body|132 mm Length|22.2 mm Inner Diameter
These lock-on bicycle grips are a pair of black rubber handlebar grips with clamp rings at the ends. The set is made for a 22.2 mm inner-diameter handlebar fit and has a stated length of 132 mm. Its textured surface and lock-on construction give a bicycle cockpit a defined grip component that can be matched to the handlebar size. The black body and colored locking-ring details shown in the product images create a straightforward accessory format for bicycle builds and replacement work.
Lock-on bicycle grips combine a textured rubber body with visible locking clamps. The grip body is the hand-contact area while the clamp rings sit at the ends of the grip. This visible construction separates the gripping surface from the parts that secure the grip around the handlebar. For a rider or workshop preparing a handlebar setup the two stated measurements provide clear starting points: 132 mm of grip length and a 22.2 mm inner diameter.

The product uses a black rubber grip body with a raised textured pattern. The visible pattern combines grid-shaped and diagonal surface details. These details provide a distinct contact texture along the length of the lock-on bicycle grips rather than a smooth cylindrical finish. The shape is shown as a matched pair so both sides of a bicycle handlebar can use the same grip style.
Each lock-on bicycle grip has end clamps that are visible around the grip body. The clamp rings are a defining construction detail of this accessory. In the product images the rings appear at the outer ends of the pair and an Allen key is shown with one product view. The locking arrangement gives the grip set a finished end-to-end appearance while keeping the rubber body and clamp details visually separate.
Bike handlebar grips are a small part of the cockpit but their dimensions affect how they sit on the bar. This set keeps the stated 22.2 mm inner-diameter dimension at the center of its design. The product images also show the installed black grip on a bicycle handlebar. The installed view helps illustrate the compact profile of the grip body and the placement of the locking ring at the end.

The 22.2 mm handlebar grips format refers to the stated inner diameter of this grip set. This measurement is shown in the product imagery alongside the 132 mm length. Together they describe the inside fit point and the length of the hand-contact section. The dimensions are presented below for quick reference.
| Specification | Stated detail |
|---|---|
| Product type | Lock-on bicycle grips |
| Grip body | Black rubber with textured surface |
| Length | 132 mm |
| Inner diameter | 22.2 mm |
| Construction detail | Visible locking clamp rings |
| Set format | One pair |
For 22.2 mm handlebar grips the inner diameter is the dimension that meets the handlebar. The 132 mm figure describes the length of each grip body. Reading these two values together is useful when planning the available space on a handlebar and when matching replacement bike handlebar grips with the existing bar diameter. The clamp-ring layout remains visible at the ends of the black rubber form.

These lock-on bicycle grips are described for MTB BMX road and cruiser bicycle applications. The product is also presented as an accessory for bicycle handlebars. Across these uses the product identity stays the same: a pair of textured black rubber bike handlebar grips with locking clamp rings. The compact format can suit a bicycle accessory range where a consistent pair of grips is needed for the left and right sides of a bar.
On a mountain bike the textured grip body and end-ring construction create a recognizable cockpit detail. On a BMX or road bicycle the same 22.2 mm handlebar grips format keeps the focus on the stated bar fit and grip length. Cruiser bicycle setups can use the same pair format when their handlebar diameter matches the stated inner diameter. The product does not change form between these bicycle categories; the pictured component remains the black lock-on grip with its textured surface and clamp rings.
The product images show both close views and an installed handlebar view. A close view makes the raised texture and locking-clamp edge easier to see. The installed view shows how bike handlebar grips occupy the hand position on a bicycle bar. A dimensional image then links that familiar installed position to the 132 mm length and 22.2 mm inner-diameter figures.

The lock-on bicycle grips use clamp rings that are visible in the product images. Align each grip on the handlebar with the textured rubber body in the desired hand position and use the locking hardware shown with the set to secure the clamp-ring construction. Keep the stated 22.2 mm inner diameter in view when preparing the handlebar fit. The grip pair is supplied as two matching black grips rather than a single replacement piece.
For product enquiries please include the quantity needed and the bicycle application. The stated 132 mm length and 22.2 mm handlebar grips dimension help identify this black rubber lock-on bicycle grips set. Packaging information can be discussed with the product enquiry so the requested quantity and product details can be addressed together.
The product is presented as one pair of black textured rubber bicycle handlebar grips with visible locking clamp rings.
The stated inner diameter is 22.2 mm. The product images also identify the grips as 22.2 mm handlebar grips.
The stated grip length is 132 mm.
The product is described for MTB BMX road and cruiser bicycle applications.
The black rubber grip body has a visible textured pattern with grid-shaped and diagonal details.
Textured Rubber Grip Body|132 mm Length|22.2 mm Inner Diameter