The OUXI GT2000 display is a complete LCD dashboard assembly built as a direct replacement part for the OUXI GT2000 electric bike. Instead of a bare screen, the OUXI GT2000 display arrives as a full kit: a rectangular LCD panel, a handlebar clamp, a wired control unit and a pair of NFC cards. This makes the OUXI GT2000 display a practical ebike display replacement for riders who need to restore the original dashboard function on their GT2000 without sourcing each small component separately.
Because every element in the kit is matched to the same model, the OUXI GT2000 display keeps the familiar handlebar layout. The screen mounts where the factory unit sat, the control cluster wires in through the supplied lead, and the NFC cards work with the dashboard as delivered. For anyone searching for genuine OUXI GT2000 parts, this assembly covers the dashboard side of the bike in one package.
The kit groups the dashboard components a GT2000 owner actually handles during a swap. The rectangular LCD panel is the main readout. The wired control unit is the round button cluster that mounts beside the grip and connects to the screen through its cable. The handlebar clamp holds the display in place, and the two NFC cards pair with the dashboard for tap-based access. Treating these as one ebike display replacement set keeps the parts consistent with each other.
Having the panel, control cluster, clamp and cards arrive together removes the usual uncertainty of matching separate pieces. Each item is cut for the same handlebar and wiring layout, so the parts behave as one unit from the first mount. The round control cluster is the piece a rider touches most, and its button face is positioned to sit flat against the thumb when the clamp is tightened near the grip. The cable between the cluster and the screen is pre-terminated, so there is no splicing or crimping to do during a routine swap.
Viewed as an lcd display throttle pas kit, the assembly brings together the readout and the handlebar controls that a rider interacts with every trip. The LCD panel carries a protective bezel, and the detail views show a Type-C port behind a dust cover on the control side, giving a modern, serviceable connection point. The round control unit sits within easy reach of the grip, so the layout stays close to the original GT2000 feel.
The two green NFC cards are a defining part of this lcd display throttle pas kit. They tap against the dashboard rather than relying on a physical key, which keeps the handlebar area clean. Each piece in the kit is finished for outdoor handlebar use, with sealed connectors and a cover over the Type-C port to help keep dust and splashes away from the contacts.
The Type-C port deserves a short explanation. In everyday terms, it is the same reversible connector found on most recent devices, which means the cable seats either way up and the plug tends to be easy to find by feel. Keeping the port under a dust cover when it is not in use is a small habit that protects the contacts on a bike that spends its life outdoors. The bezel around the screen is slightly raised, so the glass is set back from the frame edge and is less exposed when the bike is parked against a wall or stored among other gear.
The OUXI GT2000 display is shaped to sit on the GT2000 handlebar the same way the factory dashboard does. The clamp wraps the bar, the screen faces the rider, and the wired control unit routes its cable to the display through a keyed connector. That connector is color-coded, which in plain terms means it only seats one way, so the control lead and the screen line up without guesswork during a dashboard swap.
If you have handled an electric bike dashboard before, the logic here is familiar: mount the clamp, seat the screen, route the control cable, then pair the NFC cards. The components are built for the GT2000 handlebar envelope, so the OUXI GT2000 display drops into the existing position rather than needing adapters. Keeping to genuine OUXI GT2000 parts for this area avoids the fit gaps that come from mixing dashboards across different models.
The dimensions below are taken from the product's own measurement image and describe the display and control hardware. They are the figures to match against the existing GT2000 dashboard when confirming the replacement footprint.
| Attribute | Detail |
|---|---|
| Product type | LCD NFC dashboard assembly (ebike display replacement) |
| Model application | OUXI GT2000 electric bike |
| Display width | 12 cm |
| Display height | 7.6 cm |
| Depth-related measurement | 4.9 cm |
| Control-unit measurement | 5.1 cm |
| Net weight | 225 g |
| Connection | Type-C port; wired control lead |
| Included cards | 2 x NFC card |
This OUXI GT2000 display is intended as a like-for-like dashboard swap. The practical fit points are the handlebar clamp diameter and the matching keyed connector between the control unit and the screen; because the kit is made for the GT2000, these line up with the original layout. The 12 cm by 7.6 cm panel size and the 225 g net weight give a clear reference for the space the dashboard occupies on the bar.
A short note on the controls: the wired control unit is the input side of the dashboard, so it should be seated and connected before the NFC cards are paired. If your main goal is to restore a tidy, model-matched cockpit, keeping to this ebike display replacement rather than a generic screen means the clamp, cable and cards already belong together.
It also helps to think about the order of work. Mounting the clamp first gives a stable base, and only then does the screen click into position without strain on the cable. Routing the lead along the existing handlebar path keeps it clear of the steering sweep, and a couple of small ties stop it from snagging. Once the hardware is settled, the two cards can be tapped and stored. Because the whole set is built around the one bar size and the one connector, the result is a cockpit that looks and feels like the original rather than an improvised fix. Riders who keep a spare card in a bag or wallet also have a simple backup on hand without touching the wiring again.
The OUXI GT2000 display ships as the dashboard set shown here: LCD panel, wired control unit, handlebar clamp and two NFC cards. If you are stocking OUXI GT2000 parts or restoring a single bike, send a message with the quantity you need and we will confirm current availability and packaging. We are glad to help match this ebike display replacement to your GT2000 build.
EN
