OUXI GT2000 Front Light with 6PIN Connection

This OUXI GT2000 front light is a replacement lighting unit for the GT2000 electric motorcycle configuration. It combines a black dual-lens front housing with an attached cable and a 6PIN plug connection. The model-specific application and connector arrangement make this part a focused option for replacing a front lamp on the stated GT2000 setup rather than a general-purpose lamp for unrelated vehicles.

The front of the unit uses two visible lens sections in one compact housing. Behind the housing, the cable exits through a protected rear position and ends in a round connector. Mounting ears and visible fastening hardware form part of the lamp assembly. Together, these details support a front-mounted replacement layout for the OUXI GT2000.

Dual-Lens Front Lamp Construction

The OUXI GT2000 front light has a two-lens layout that gives the lamp its distinct face. The black outer housing holds the lenses at the front while the rear of the assembly carries the cable outlet and mounting points. This configuration keeps the lighting assembly and its connection lead together as one replacement part.

ABS plastic forms the outer housing. For a front-mounted electric motorcycle part, the housing provides a practical enclosure around the visible lamp structure. The supplied product images show the front lenses, rear cable routing, mounting ears, metal mounting pieces, and fasteners. These visible components help identify the physical configuration of this OUXI GT2000 front light.

• Dual-lens front layout in a black housing
• 6PIN plug connection for the confirmed GT2000 configuration
• Attached cable with a round connector end
• Rear cable outlet with protective sleeve
• Mounting ears and visible mounting hardware
• ABS plastic outer housing

6PIN Connector and GT2000 Application

The connector is a key part of this OUXI GT2000 front light. This version is identified with a 6PIN plug and is intended for the stated GT2000 electric motorcycle application. The plug count is part of the product definition: this is a 6PIN lamp version, not a 3PIN or 4PIN version.

For product ranges that use similar-looking front lamps, the connector version and vehicle model remain important identifiers. The two-lens housing, cable lead, connector end, and mounting arrangement are presented together for the GT2000 configuration. Keeping the specified model and 6PIN relationship together helps maintain the intended replacement application of this front lamp.

Replacement-Part Layout

As an electric motorcycle front lamp replacement part, the unit brings the front lens assembly, housing, cable, connector, and mounting features into one product layout. The dual-lens face provides the visual character of the lamp while the rear section organizes the cable exit and mounting points. The product can be used in repair or replacement work on the compatible OUXI GT2000 front-light position.

The supplied images show the lamp from front, rear, and angled views. These views make the short cable lead, the round connector, the rear protective sleeve, and the mounting ears easy to recognize. The installation pieces displayed with the product are visible parts of the presentation; no unlisted measurements, electrical ratings, or additional material specifications are stated here.

Product Specifications

The table summarizes the confirmed identity of the OUXI GT2000 front light. The 6PIN designation belongs to this product version and is not interchangeable in the description with other connector counts. The dual-lens construction and black ABS outer housing are also part of the stated lamp configuration.

Related Connector Versions

Related lamp versions are available for different vehicle applications and connector counts. The OUXI V8 3PIN front light is a separate 3PIN version for the OUXI V8. The V20 4PIN front light is a separate 4PIN version for the V20 electric bike. These related links identify distinct products; they do not change the OUXI GT2000 and 6PIN application of this lamp.

For the GT2000 configuration, this OUXI GT2000 front light keeps the two-lens housing and 6PIN plug relationship together. The product photographs show the connector end as part of the attached cable and show the lamp installed at the front of an electric two-wheel vehicle. The combination of model-specific application, connector version, and visible mounting layout distinguishes this part within the related lamp range.

Installation Use

This OUXI GT2000 front light is arranged as a front-position replacement assembly with a cable lead and mounting features. During replacement work, the lamp can be positioned through its mounting ears and connected through its supplied 6PIN plug arrangement for the stated GT2000 application. The dual-lens housing sits at the front while the cable exits from the rear of the unit.

The black housing and visible mounting details create a compact front-lamp format for repair work on the compatible electric motorcycle configuration. The part is suited to product listings and repair inventories that need a clearly identified GT2000 front-light option with a 6PIN connector version and a dual-lens face.

Inquiry and Product Information

Use this OUXI GT2000 front light for a GT2000 front-lamp replacement requirement that calls for the stated 6PIN plug version. The product combines its dual-lens front, ABS housing, attached cable, round connector, and mounting features in one front-light assembly. Contact us for current product information and packaging details for this GT2000 6PIN front light.

Frequently Asked Questions

What vehicle application is stated for this front light?

This front light is identified for the OUXI GT2000 electric motorcycle configuration.

How many pins does this lamp version use?

This OUXI GT2000 front light uses a 6PIN plug connection.

What is visible on the lamp assembly?

The product has a black dual-lens housing; attached cable; round connector; rear cable outlet; mounting ears; and visible mounting hardware.

Is this the same product as the linked OUXI V8 or V20 lamps?

No. The linked OUXI V8 lamp is a 3PIN version and the linked V20 lamp is a 4PIN version. This product remains the 6PIN OUXI GT2000 front light.