OUXI V8 Charging Port for E-Bike Battery Charging

This replacement charging-port assembly is made for the OUXI V8 e-bike battery system. This compact component brings the exterior charging connection, protective cover, internal spring mechanism, wiring harness, and plug connector together in one service part. An OUXI V8 charging port gives a worn, damaged, or missing battery charging interface a like-for-like replacement point within the bike’s original charging arrangement.

Designed as an electric bike charging port, the assembly uses a black panel-mount face with a hinged protective cover. The cover closes over the charging opening when the connector is not in use, while the rear of the OUXI V8 charging port carries the harness and connector for connection inside the e-bike. The visible layout keeps the external access point and the internal lead together as one replacement part.

Product Overview

This component is identified for the OUXI V8 battery charging application. It is an e-bike battery charger port, not a complete charger, battery, bicycle, or universal electrical accessory. Its job is to provide the physical charging connection on the bicycle for the applicable battery system. Keeping that product identity clear helps preserve the intended role of the component during maintenance or replacement work.

The black face sits at the outward-facing side of the mounting position. Behind that face, the component includes a spring element, red and yellow leads, and a plug-style connector. The combined arrangement makes the electric bicycle battery port suitable where the existing charging-port assembly is being replaced as a single unit.

Key Features of the OUXI V8 Charging Port

• Panel-mount charging face: The OUXI V8 charging port has a compact black mounting panel that presents the charging opening on the outside of the e-bike.
• Hinged protective cover: A flip cover is fitted over the port opening to keep the opening covered between charging sessions.
• Integrated wiring harness: The electric bike charging port is supplied with red and yellow leads already attached to the port assembly.
• Plug connector: The rear harness ends in a connector, providing the connection interface within the bicycle’s existing wiring arrangement.
• Visible spring mechanism: The rear structure of the OUXI V8 charging port includes a spring component as part of the port mechanism.

These visible parts form the practical structure of the assembly. The cover protects the outward-facing opening, the panel gives the component its mounting face, and the harness routes the electrical connection away from that face. The connector at the end of the lead makes the port assembly a defined replacement component rather than a loose socket alone.

Construction and Connection Layout

The assembly combines the user-accessible charging opening with its rear wiring components. From the outside, the black panel and cover form the part of the assembly seen on the bicycle. From the inside, the spring structure, red and yellow wires, and plug connector form the connection side. This front-to-rear layout is useful when replacing an electric bicycle battery port that needs both an exterior charging point and an attached internal lead.

The flip cover is a straightforward feature of the assembly: it folds over the opening when charging is complete and opens when access to the port is needed. The harness remains behind the panel, so the external charging location and the internal connector remain part of the same assembly. No separate charger is included or implied by this e-bike battery charger port.

Designed for the OUXI V8 battery charging application, this part serves as a charger port within the e-bike’s charging arrangement. The compact port assembly keeps the protected external opening and the connected internal lead in one component for the named bicycle application.

Replacement Use and Everyday Value

The assembly is relevant when the bicycle needs a replacement for its battery charging interface. Because the assembly includes the port face, cover, harness, and connector, it keeps the replacement focused on the parts visible in the charging connection layout. This is useful for maintenance of an OUXI V8 e-bike where the existing port assembly is the component being addressed.

For a workshop, parts counter, or individual maintaining an OUXI V8 bicycle, the assembly provides a clearly identified replacement category. Its black panel, covered opening, attached red and yellow wires, spring element, and connector give the part a recognizable configuration. It is intended for the battery charging location, while the bike’s battery and charger remain separate components.

The protective cover adds a practical handling feature. Closing the cover after use keeps the charging opening covered; opening it provides access for charging. This simple action is built into the port assembly and does not require a separate cap as another part.

Applications

• Replacement of the charging-port assembly in an OUXI V8 e-bike battery charging position.
• Maintenance work involving an electric bike charging port with an attached harness and connector.
• Service of an e-bike battery charger port where a black panel-mounted, covered port assembly is required.

The component is for electric bicycle battery charging use in the named OUXI V8 e-bike application. Its supplied configuration combines a covered panel-mounted port, a rear spring element, red and yellow leads, and a connector as one replacement assembly.

Specifications

The table summarizes the product identity and visible configuration of the assembly. The OUXI V8 application, model reference, panel-mounted covered port form, and harness-and-connector configuration describe the key elements of this replacement part.

Handling and Installation Context

This vehicle electrical component has an exterior port and attached internal wiring. During replacement work, the panel faces outward at the charging location while the harness and connector remain on the inside of the bicycle’s wiring arrangement. The protective cover should be free to open for charger access and close over the port opening after use.

Use this component for its stated OUXI V8 e-bike battery charging application. The component’s port, cover, spring, leads, and connector are supplied as one configuration, giving maintenance work a direct replacement assembly for the charging interface.

Packaging and Inquiry

For product information, packaging details, and an order inquiry, contact us with model reference OXV8-58. The part is supplied as the black covered port assembly with its visible wiring harness and connector configuration.