This GT 250W Motor Clutch is one of the New Image electric bike spare parts made as a direct replacement component for the OUXI V8 electric bike. Supplied under model number OXV8-44C, it is a planetary gear assembly built around a 37T planetary gear set with nylon gears, and it carries the drive inside the 250W hub motor. As part of a focused parts range, this clutch gear is intended for repair rather than as a universal fit, so it is matched to the OUXI V8 motor it was designed for.
When a hub motor starts to slip, lose drive or run noisier than normal, the clutch and planetary gears are often the parts that need attention. Keeping the right replacement gears on hand means a worn gear set can be swapped out instead of replacing the whole motor, which is why this 250W ebike motor clutch is listed as a defined OUXI V8 e-bike parts item.
The assembly is a round carrier that holds three toothed nylon gears arranged as a planetary set. This 37T planetary gear layout is the part of the motor that transfers power from the central drive to the wheel, and the three-gear arrangement spreads the load across the set rather than through a single gear. Nylon gears are commonly chosen for this role because they run against the mating steel components with less noise than an all-metal set.
Each gear sits in the carrier with its teeth exposed so the set meshes with the rest of the GT 250W motor clutch when it is installed. Because the gears are a wear part, having matching OUXI V8 e-bike parts ready makes a gear service a quick job. The confirmed structure here is simple: a circular carrier, three nylon planetary gears and the 37T tooth count stated for this unit.
The confirmed specifications below describe this item as supplied. Use them with your own motor details when matching electric bike spare parts to your build.
| Product name | GT 250W Motor Clutch |
| Type | Electric bicycle part |
| Brand | New Image |
| Model number | OXV8-44C |
| Suit for | OUXI V8 electric bike |
| Gear | 37T planetary gear; nylon gears |
| Feature | Bicycle spare part |
| Application | Other bicycle parts |
| Weight | 0.6 kg |
The model number OXV8-44C and the OUXI V8 fit are the two points that confirm this is the correct 250W ebike motor clutch for your motor. At 0.6 kg the gear set is a light part to handle, and because it is sold as model-specific OUXI V8 e-bike parts rather than a generic gear, the tooth count and fit are already matched to the motor.
This 250W ebike motor clutch is listed for the OUXI V8 electric bike, and its most common use is a planetary gear service inside the 250W hub motor. Riders who notice reduced drive, a grinding sound or a motor that spins without pulling often trace the problem to a worn gear set, and matching electric bike spare parts bring the drive back without a full motor swap.
Repair shops and resellers keep this part as stock so an OUXI V8 motor service can be finished in one visit. Because a model-specific gear set is easier to fit than a generic gear, a shop that handles OUXI V8 bikes can plan a predictable gear change. Fleet operators use the same approach, holding a small supply of these OUXI V8 e-bike parts so a bike is not left idle while a gear set is sourced.
Fitting this gear set follows the normal path for 250W hub motor service: open the motor side cover, lift out the worn planetary gears and seat the new 37T planetary gear set into the same carrier position. Keeping the gears in the orientation they came out in is the main step in a clean swap, and the nylon gears should mesh smoothly with the mating parts once seated.
To confirm a correct fit, check that your bike is an OUXI V8 and that your motor uses a 37T planetary gear set before choosing this part, since these electric bike spare parts are matched to that motor rather than a universal gear. The model number OXV8-44C is the clearest reference point. If your motor differs, share your bike model and a photo of your existing gear set so the right OUXI V8 e-bike parts can be confirmed.
This clutch gear is produced by New Image, a Shenzhen-based manufacturer with its own research, design and sales teams and OEM and ODM experience across electric bike spare parts. For buyers who need branded or neutral packing, OEM and ODM options are available so the part can be prepared to match a store or workshop presentation.
To move forward, send your bike model, the quantity you need and your delivery destination. With those details the correct 250W ebike motor clutch and packaging can be confirmed for your order.
It is supplied as model OXV8-44C for the OUXI V8 electric bike and its 250W hub motor. Confirm your bike is an OUXI V8 and that your motor uses a 37T planetary gear set before choosing this part.
The set uses nylon gears arranged as a 37T planetary gear on a round carrier. Nylon gears are commonly used in this role because they run more quietly against the mating components than an all-metal set.
Common signs are reduced drive, a motor that spins without pulling and more noise than usual from the hub. When these appear the planetary gear set is a frequent cause and a matching gear service often restores normal drive.
A model-specific gear set is already matched to the motor it was designed for so the tooth count and fit line up. A universal gear can differ in tooth count or diameter and may not seat correctly which is why matching the model is the safer choice.
Yes. The manufacturer New Image offers neutral packing as standard and supports OEM and ODM requests so packaging and branding can be adjusted for workshop or reseller orders.
EN
