Product Overview

The Sur Ron Hyper Bee handle grip SUHB-04 is the right-side handlebar grip designed as a replacement part for the Sur Ron Hyper Bee electric dirt bike. Constructed from ABS plastic with a textured outer barrel and white inner sleeve, the grip mounts on the front right handlebar position — the throttle side. The SUHB-04 model number is confirmed in the product attributes and visible on the product label in the detail images, providing a direct reference for compatibility verification before installation.

At 15.5 cm in length and 6 cm at the widest end point, the grip fits the compact front handlebar zone of the Hyper Bee. The 44.7 g net weight keeps the front-end balance neutral during off-road sessions. Each unit is supplied as a single right-side grip, allowing the throttle-side grip to be replaced independently without disturbing the left handlebar assembly or throttle mechanism. This makes the SUHB-04 suitable for targeted maintenance when only one side shows wear or damage.

The assembly combines a structural ABS outer shell, hexagonal convex barrel texture, end anti-slip zone, guard plate flange at the inboard end, and a white inner sleeve. All five structural elements are confirmed by the product images and listed attributes. The SUHB-04 is designed for the Sur Ron Hyper Bee handlebar system as a direct drop-in replacement; no additional hardware or adhesive is included, as installation uses the existing handlebar tube and the grip's integral inner sleeve for retention.

Key Features

ABS Plastic Outer Shell

The outer shell of the SUHB-04 Sur Ron Hyper Bee handle grip is formed from ABS plastic. ABS combines impact resistance with dimensional stability suitable for handlebar grip applications, where the component must withstand handlebar clamp pressure, rider grip force, and incidental contact during off-road riding. The material holds its molded geometry across the temperature range encountered during outdoor electric dirt bike use, keeping the grip barrel stable throughout extended riding sessions. ABS also accepts surface texturing with consistent feature depth, which supports the hexagonal convex pattern and end-zone detail on this grip.

Hexagonal Convex Grip Texture

The main barrel of the grip carries a hexagonal convex surface pattern along the primary gripping zone. The raised hexagonal faces create multiple distinct contact points that distribute rider palm and finger pressure across a wider surface area than a smooth cylinder. This pattern runs along the full gripping length of the barrel between the end cap and the inboard guard plate flange. The hexagonal geometry provides a grip surface that remains tactile and secure when the rider's hands are subject to trail conditions including vibration, dust, and light moisture from outdoor environments.

End Anti-Slip Zone

At the outer end of the grip barrel, a secondary anti-slip texture zone reinforces tactile contact in the area closest to the bar end. When a rider's hand shifts outward along the handlebar during braking or direction changes, this end zone maintains consistent grip friction. The end anti-slip pattern is visible in both the close-up detail image and the white-background product images of the SUHB-04. The outer end transitions into the end cap structure that closes the bar end of the assembled grip, completing the grip's protective envelope around the handlebar tube end.

Guard Plate Flange at Inboard End

The inboard end of the SUHB-04 incorporates a guard plate flange that creates a physical stop between the grip barrel and the handlebar stem area. This flange prevents the rider's hand from sliding inward along the bar toward the stem clamp zone during forceful gripping or hard braking. The guard plate is visible in the application installation image and in multiple white-background product images, confirming it is a structural part of the assembled grip rather than a separate add-on accessory. After full installation, the flange seats flush against the inner handlebar stop and defines the functional extent of the grip zone on the right bar.

White Inner Sleeve

The Sur Ron Hyper Bee right grip assembly includes a white inner sleeve that interfaces directly with the handlebar tube. This sleeve is visible in every product image that shows the inboard face of the grip. It serves as the primary mounting surface between the ABS outer shell and the metal handlebar, and its diameter is sized for the factory Hyper Bee handlebar tube. The outer ABS shell and the white inner sleeve form a single pre-assembled unit; the two components should not be separated before installation, as they work together to provide a secure and stable grip position on the handlebar throughout the service life of the part.

Specifications

The 15.5 cm grip length and 6 cm end width define the physical footprint of the SUHB-04 on the handlebar, as labeled in the product dimension diagram. The 44.7 g net weight is recorded in the same diagram annotation. The SUHB-04 model number identifies this grip as the right-side unit for the Sur Ron Hyper Bee; the left-side grip for the same platform uses a separate model number. Matching the model number against the vehicle side and platform before ordering is the most direct way to confirm the correct part selection.

Installation and Compatibility

The SUHB-04 is a direct replacement for the right-side electric dirt bike handlebar grip at the front throttle position on the Sur Ron Hyper Bee. Before installation, confirm the target vehicle is a Sur Ron Hyper Bee and that the replacement position is the right handlebar. The SUHB-04 covers the right side only; the left handlebar uses a separate grip model with its own part number.

Installation involves removing the existing right grip from the handlebar tube, cleaning the exposed tube surface, and pressing the SUHB-04 onto the clean bar end. The white inner sleeve is sized for the factory Hyper Bee handlebar tube outer diameter. If the original handlebar has been replaced with an aftermarket bar of a different outer diameter, verify the sleeve-to-tube fit before proceeding. A Sur Ron replacement grip that does not seat fully along the inner sleeve length may rotate or shift on the bar under load; complete insertion of the sleeve confirms the grip is correctly positioned. The guard plate flange at the inboard end should contact the inner handlebar stop after the grip is fully seated.

Bar end plugs and grip adhesive are not supplied with the SUHB-04 and may be added at the owner's discretion based on riding conditions and preferred retention method. The ABS outer shell and white inner sleeve arrive pre-assembled and should be installed together as a single unit. Do not attempt to separate the sleeve from the shell before installation.

Tracking the source of grip rotation or early-wear failures in electric dirt bike handlebar grip assemblies often points to the seating condition at installation rather than the grip material. A grip installed with residual debris or moisture between the sleeve and the handlebar tube can develop movement over time even when the initial fit felt correct. Cleaning the handlebar tube surface thoroughly and ensuring it is dry before pressing the inner sleeve into position reduces the risk of post-installation movement.

Inquiry and Ordering

The Sur Ron Hyper Bee handle grip SUHB-04 is available for inquiry. Contact our team to confirm current stock, lead times for your required quantity, and shipping arrangements for your region. If your maintenance project requires both the right and left handlebar grips for the Sur Ron Hyper Bee, the left-side grip is listed as a separate item — provide both model numbers in your inquiry to receive a complete paired quote. For volume replacement orders or fleet maintenance programs, include your vehicle model, required quantities, and destination when reaching out to allow accurate lead time and pricing confirmation.