These bicycle brake pads are replacement parts for the Ultra Bee electric dirt bike. The set uses a sintered friction material and is shaped for the brake-pad position shown in the supplied product material. For riders replacing worn parts, the product brings the essential identity, fit dimensions, and installation-side layout into one clearly defined component. The bicycle brake pads are intended for an Ultra Bee brake system where the pad profile and mounting-hole position match the existing caliper arrangement.
A brake pad is a service part that works inside the caliper against a brake disc. In straightforward terms, the friction surface is the working face that contacts the disc, while the back plate supports the pad in the caliper. These bicycle brake pads combine that familiar two-part arrangement in a sintered pad format. The supplied material identifies the product as an Ultra Bee replacement accessory, so the product description stays focused on that specific electric dirt bike application rather than presenting it as a universal pad.
The bicycle brake pads have a measured pad width of 68 mm and a height of 24 mm. The mounting-hole spacing shown for the product is 35 mm. Those dimensions describe the visible pad outline and mounting relationship, giving the part a practical starting point when matching a replacement to an existing brake assembly. The product images also show a dark friction surface and a copper-colored backing plate.
For a brake service job, bicycle brake pads are a small component with a direct relationship to the caliper and disc. The pad profile determines how the part sits in the caliper, and the holes determine how it aligns with the retaining hardware. Keeping the product dimensions together makes it easier to identify the replacement part used on the Ultra Bee application.
Sintered bicycle brake pads use a friction material formed for brake-pad duty. On this product, the sintered pad surface is paired with the visible backing plate to create the complete pad assembly. The friction face is the dark portion seen in the product images; the backing plate is the copper-colored support behind it. Both elements are part of the pad itself and are supplied as the brake-pad component rather than as a separate caliper or disc.
The shape of bicycle brake pads matters because a pad is positioned within a limited caliper space. A replacement part must follow the existing pad outline and mounting arrangement to sit in the intended location. The 68 mm by 24 mm profile and 35 mm hole spacing supplied for this item give the product a defined physical format. This helps distinguish these Ultra Bee pads from other brake-pad profiles used on different electric bike or dirt bike assemblies.
Brake pads for electric bike applications are often discussed by material and model fit, but the physical outline remains equally important. Here, the sintered material, the visible back-plate construction, and the listed dimensions belong to the same product identity. The bicycle brake pads therefore provide a focused replacement option for the stated Ultra Bee application.
The dimensions shown for these bicycle brake pads are summarized below. They describe the product rather than the dimensions of the complete brake system.
| Detail | Listed Value |
|---|---|
| Pad width | 68 mm |
| Pad height | 24 mm |
| Mounting-hole spacing | 35 mm |
| Pad type | Sintered brake pad |
| Application | Ultra Bee electric dirt bike replacement accessory |
Brake pads for electric bike and electric dirt bike systems need to match the installed caliper layout. The 35 mm mounting-hole spacing is a direct feature of these bicycle brake pads, while the 68 mm width and 24 mm height describe the pad body. Matching the profile, hole spacing, and the Ultra Bee application keeps the replacement choice centered on the product’s confirmed configuration.
When a brake assembly is serviced, the pad pair works as part of a larger system that includes the caliper, retaining hardware, and brake disc. These bicycle brake pads do not replace those other components. Their purpose is to replace the pad component within the compatible brake arrangement. The listed measurements offer clear physical reference points for the item itself.
These bicycle brake pads are presented for Ultra Bee electric dirt bike use. The product is suited to routine replacement work when the installed pad shape and mounting pattern correspond to the listed product. The focused Ultra Bee fit keeps the page useful for riders and repair teams looking for a sintered replacement part rather than a general bicycle accessory.
Electric dirt bike riding places the brake assembly in regular use across starts, stops, and changing terrain. A brake-pad replacement is normally handled as part of brake-system maintenance, with attention to clean component placement and secure reassembly. These bicycle brake pads provide the specified 68 mm by 24 mm profile and 35 mm fit dimension for the stated application.
The product images show the pad assembly itself as well as a dimensional layout and an electric dirt bike application image. This combination reflects the practical role of bicycle brake pads: the part sits inside the brake system, while its shape and mounting points relate directly to the installed caliper. The product remains a replacement pad accessory, not a complete brake kit.
For replacement work, bicycle brake pads are installed in the caliper position occupied by the worn pad set. The pad’s mounting holes and outer profile are the key physical features involved in locating the part. The 35 mm mounting-hole spacing shown for this product is part of that layout, and the 68 mm by 24 mm pad body defines the listed size.
Brake pads for electric bike applications are service components, so clean seating and correct hardware placement are important parts of normal installation. The product should be fitted only in an arrangement that uses the stated Ultra Bee pad profile. Once installed, the pads function with the existing brake disc and caliper as part of the vehicle’s braking assembly.
The sintered material gives these bicycle brake pads their product type, while the backing plate gives the pad its supporting structure. This distinction is useful when reading the product presentation: the friction face is the working surface, and the back plate is the formed support behind it. Together, they make the complete replacement pad shown in the supplied images.
A clearly defined replacement profile keeps brake service focused on the installed component. The product is identified by its sintered construction, Ultra Bee application, 68 mm width, 24 mm height, and 35 mm mounting-hole spacing.
The pad body occupies the caliper location, the friction material faces the disc, and the mounting holes relate to the hardware that holds the pad in place. The visible copper-colored backing plate adds a recognizable construction detail to the product presentation.
For maintenance inventories, the product can be grouped with brake pads for electric bike and electric dirt bike replacement work. Its direct vehicle application and stated dimensions make the item more specific than a generic brake-pad listing.
These bicycle brake pads are offered as sintered replacement accessories for the Ultra Bee electric dirt bike. Product inquiries can focus on the listed brake-pad type, 68 mm width, 24 mm height, and 35 mm mounting-hole spacing. Providing the installed pad profile or the existing part’s dimensions helps keep an inquiry centered on the correct replacement format.
The product presentation includes six source images showing the packaged pad on a scale, the dimensional drawing, the electric dirt bike application, the pad on a white background, and product graphics. The visible pad assembly remains the focus throughout: dark friction material, a copper-colored backing plate, and the shape used for the stated Ultra Bee application.
These bicycle brake pads are sintered replacement brake pads for the Ultra Bee electric dirt bike application.
The listed dimensions are 68 mm in width, 24 mm in height, and 35 mm for the mounting-hole spacing.
The bicycle brake pads show a dark friction surface with a copper-colored backing plate. The product is identified as a sintered brake-pad type.
No. The product is a replacement pad component for the stated application, designed to work within the existing brake caliper and disc arrangement.
EN
